MITSUBISHI FX2N-8AD Analog Input Module

Series:

• This module belongs to the MELSEC-F SERIES, indicating its product series within the Mitsubishi Electric lineup.

Type:

• The module type is FX2N, providing information about its specific model or variant.

Power Supply (V):

• The module operates with a direct current (DC) power supply at 24 volts, indicating its voltage requirement for proper functioning.

Current Type:

• The module operates with direct current (DC), specifying the type of current it accepts.

Occupied I/O Points on PLC:

• This module occupies 8 Input/Output points on the PLC, signifying its connectivity and utilization within the control system.

Integrated Analog Inputs:

• The module is equipped with 8 integrated analog input channels, allowing the acquisition of analog signals.

Input Voltage Range (V):

• The module supports an input voltage range of -20 volts, providing flexibility for handling varying voltage levels.

Input Current Range (mA):

• The module accommodates two input current ranges: -20 mA to 20 mA and 4 mA to 20 mA. This specifies the adjustable current levels that the analog inputs can handle.

Min. Ambient Temperature (°C):

• The minimum recommended ambient temperature for the module to operate effectively is 0°C.

Max. Ambient Temperature (°C):

• The module can operate within a maximum ambient temperature of 55°C, indicating its temperature tolerance.

Product Dimensions & Weight:

• • Width (mm):
  • The width of the module is 75 mm, providing information about its physical size in the horizontal dimension.
• • Height (mm):
  • The height of the module is 105 mm, providing information about its physical size in the vertical dimension.
• • Depth (mm):
  • The depth of the module is 75 mm, indicating its physical size in the third dimension.
• • Weight (kg):
  • The weight of the module is 0.4 kg, providing information about its mass.

Environmental Compliance:

• • The module does not exceed the limits set by REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals).
• • 
    
  • The module is not classified as a dangerous good.
• • 
    
  • The module is compliant with RoHS (Restriction of Hazardous Substances) regulations.
• • 
    
  • The module falls under the B2B category for Waste Electrical and Electronic Equipment (WEEE) directives.