.jpeg)
.jpeg)
.jpeg)
.jpeg)
Technical specifications for
MHMD082G1U
Part Number: MHMD082G1U
Type: High Inertia
Denotes the type of the system or component as having high inertia, which refers to its resistance to changes in motion.
Configuration: Lead Wire Type
Describes the configuration of the system or component, indicating that it uses lead wires for connection.
Protection Class: IP65
Specifies the protection class of the system or component, indicating that it has a high level of protection against dust and water ingress (IP65).
Family Name: MINAS A5
Identifies the family name of the system or component, likely referring to a specific product line or series.
Series: MHMD Series
Indicates the series to which the system or component belongs, specifically mentioning the MHMD Series.
Enclosure: Except for the rotating portion of the output shaft and lead wire end.
Describes the enclosure characteristics, specifying that everything is enclosed except for the rotating part of the output shaft and the lead wire end.
Environmental Conditions: Refer to the instruction manual for detailed environmental specifications.
Flange Square Dimension: 80 mm sq.
Specifies the square dimension of the flange, indicating it is 80 mm on each side.
Motor Lead-Out Configuration: Lead Wire
Describes how the motor is configured for lead-out, indicating the use of lead wires.
Motor Encoder Connector: Lead Wire
Specifies the configuration of the motor encoder connector, indicating it uses lead wires.
Power Supply Capacity (kVA): 1.3
Indicates the power supply capacity of the motor in kilovolt-amperes, with a value of 1.3 kVA.
Voltage Specifications (V): 200
Provides the voltage specifications, indicating the motor operates at 200 volts.
Rated Output (W): 750
Specifies the rated output power of the motor, with a value of 750 watts.
Rated Current (A (rms)): 4.0
Indicates the rated current in amperes (root mean square), with a value of 4.0 A.
Holding Brake: Without
Specifies the absence of a holding brake in this motor configuration.
Mass (kg): 2.5
Provides the mass or weight of the motor, with a value of 2.5 kilograms.
Oil Seal: With
Indicates the presence of an oil seal in the motor.
Shaft: Key-way, center tap
Describes the configuration of the motor shaft, specifying the presence of a key-way and a center tap.
Rated Torque (N ⋅ m): 2.4
Specifies the rated torque of the motor, with a value of 2.4 Newton-meters.
Momentary Max. Peak Torque (N ⋅ m): 7.1
Indicates the momentary maximum peak torque of the motor, with a value of 7.1 Newton-meters.
Max. Current (A (o-p)): 17.0
Specifies the maximum current in amperes (open peak), with a value of 17.0 A.
